Door reversal directions
1.Disconnect from the electricity supply.
2.Remove all loose items, including food, store food in a cool place.
3.Remove the ventilation grill (D).
4.Unscrew the bottom hinge (E).
5.Remove the freezer door by releasing it from the middle hinge (H).
6.Unscrew the middle hinge.
7.Slide out the fridge door from pin (G), unscrew the latter and then screw it down into the hinge provided on the opposite side, after having removed the small plugs which should then be fitted on the opposite side.
8.Refit the fridge door and replace the middle hinge to the left hand side.
9.Replace the door and bottom hinge (E) on the opposite side.
10.Remove the plug (F) from the ventilation grill (D) and replace it on the opposite side.
11.Remove the handles and refit them on the opposite side. The holes that are not used are to be masked with the plastic plugs removed.
The doors can be aligned by adjustung the middle hinge, with help of a tool, after having slackened the two screws.
After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet.
Attention
After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer.
E | F |
| |
F |
|
| F |
D |
|
F |
|
H |
|
| G |
PR220 |
16
Printed on recyclated paper
