Manuals / Tricity Bendix / Kitchen Appliance / Cooktop

Tricity Bendix SB411 installation instructions Introduction, Rating Plate, Installation

Models: SB411

1 24
Download 24 pages 701 b
Page 7
Image 7

INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2).

SB 411WTS

The electrical connection must be made using an all pole isolating switch, or other suitable means of disconnection, with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and comply with all relevant wiring regulations.

The cable should be routed away from potentially hot areas marked by 'X' in the diagram below.

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the oven compartment.

This is a type 'Y' appliance, which means it is free- standing and can be fitted with cabinets on one or both sides.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the appliance is required to enable the appliance to be moved into position.

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

7

Page 6 Page 8
Page 7
Image 7
Tricity Bendix SB411 installation instructions Introduction, Rating Plate, Installation
Page 6 Page 8

SB411 specifications

The Tricity Bendix SB411 is a notable addition to the realm of modern kitchen appliances, specifically designed to enhance the cooking experience with convenience and efficiency. This single oven showcases a blend of innovation, style, and practicality, making it an excellent choice for both amateur cooks and seasoned chefs.

At the core of the SB411 is its user-friendly interface, featuring an easy-to-navigate control panel that allows users to select various cooking settings without hassle. The oven is equipped with multiple cooking functions, including conventional heating, fan-assisted cooking, and grilling, which provide versatile options suitable for a wide range of recipes. The fan-assisted feature is particularly beneficial as it ensures even heat distribution, resulting in perfectly cooked dishes.

One of the standout features of the Tricity Bendix SB411 is its impressive capacity. With ample space, it accommodates larger dishes, making it ideal for family meals and entertaining guests. The interior is lined with a non-stick coating, simplifying the cleaning process and ensuring that food does not stick to the walls of the oven.

Energy efficiency is another characteristic that sets the SB411 apart from its competitors. With an A energy rating, this oven is designed to reduce power consumption without compromising on performance. This not only helps in saving on electricity bills but is also an environmentally friendly choice, catering to those who are conscious of their carbon footprint.

The design of the Tricity Bendix SB411 is equally noteworthy. It features a sleek and modern aesthetic that can seamlessly integrate into various kitchen styles. The double-glazed door not only enhances the oven's appearance but also helps maintain heat, improving efficiency and safety.

Safety is paramount in the design of the SB411. The oven is equipped with features such as a child lock and cool-touch door, which provide added peace of mind, especially in homes with young children.

In conclusion, the Tricity Bendix SB411 stands out as a multifaceted kitchen appliance, blending functionality, energy efficiency, and safety into an attractive package. Its advanced features and user-centric design make it a wise investment for anyone looking to improve their cooking capabilities while enjoying the benefits of reliability and style in their home kitchen.