INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2).

The cable should be routed away from potentially hot areas marked by an ‘X’ in the diagram below.

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the oven compartment.

This is a type X appliance, which means it is free- standing and can be fitted with cabinets on one or both sides.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at the sides of the appliance is required to enable the appliance to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Air gap

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix SE340 installation instructions Introduction, Rating Plate, Installation
Page 7 Page 9

SE340 specifications

The Tricity Bendix SE340 is a highly regarded appliance in the realm of cooking, particularly known for its reliability and efficiency. This model exemplifies the innovative engineering that Tricity Bendix is famous for, combining modern technologies with user-friendly features to create an outstanding cooking experience.

One of the defining characteristics of the SE340 is its versatile cooking capabilities. This appliance typically features multiple cooking functions, including traditional fan-assisted cooking, grilling, and conventional baking. This versatility allows users to prepare a wide variety of dishes, making it suitable for everything from family meals to gourmet cooking sessions.

The SE340 also incorporates advanced heating technologies that ensure even heat distribution across the cooking cavity. This is crucial for achieving perfect cooking results, as it prevents hot spots and ensures that food is cooked uniformly. Additionally, with rapid preheat times, users can save valuable time, allowing for a more efficient cooking process, particularly for busy households.

Moreover, the Tricity Bendix SE340 is designed with user convenience in mind. The intuitive control panel is typically easy to navigate, featuring clear dials and an LCD display that provides essential information at a glance. This ease of use is complemented by features such as programmable timers and temperature settings, which enable users to personalize their cooking experience to suit their preferences.

Safety is also a priority in the design of the SE340. The appliance often comes equipped with features such as cool-touch doors and heat-resistant surfaces, ensuring that users can cook with confidence. Furthermore, integrated safety cut-off systems add an extra layer of protection, minimizing the risk of accidents in busy kitchens.

In terms of aesthetics, the SE340 usually boasts a sleek and modern design, making it a stylish addition to any kitchen décor. Its compact size ensures that it fits seamlessly into various kitchen layouts, allowing for optimal space utilization without compromising functionality.

In summary, the Tricity Bendix SE340 stands out with its blend of versatile cooking functions, advanced heating technologies, user-friendly controls, and safety features. Whether you are an inexperienced cook or a seasoned chef, this appliance offers the efficiency and reliability needed to elevate your culinary creations, making it an excellent choice for any home.
Top Page Image Contents