INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the front frame of the appliance and can be seen upon opening the top cavity door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact you supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

Six square millimetres (6.00mm2) is the recommended cross-section area.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The cable must be routed away from potentially hot areas marked by X in the diagram below.

To move the appliance, open the fan oven door, and lift the appliance by holding inside the top of the compartment.

This is a type Y appliance which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Ensure that the appliance is standing level.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm all around the appliance is required to enable the appliance to be moved into position.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

REAR VIEW

8

Page 8
Image 8
Tricity Bendix SIE501 installation instructions Introduction, Rating Plate, Installation

SIE501 specifications

The Tricity Bendix SIE501 is a highly efficient and reliable built-in single oven that has gained popularity due to its innovative features and user-friendly design. This appliance is engineered to meet the demands of modern kitchens while offering a blend of functionality and style.

One of the standout features of the SIE501 is its multifunctional cooking options. This oven comes equipped with a variety of cooking modes, including conventional cooking, fan-assisted technology, grill, and defrost settings. The versatility allows users to experiment with different recipes and cooking techniques, making it perfect for both novice cooks and seasoned chefs.

The SIE501 boasts an impressive energy efficiency rating, which not only helps reduce utility bills but also aligns with environmentally conscious standards. With improved insulation and optimized heating elements, this oven ensures minimal energy wastage while maintaining consistent cooking temperatures. This feature is particularly beneficial for users who are looking to minimize their carbon footprint without compromising on performance.

In terms of design, the Tricity Bendix SIE501 embodies a sleek and modern aesthetic that fits seamlessly into any kitchen decor. Its compact size does not sacrifice oven capacity, and it can accommodate various dish sizes, making it practical for family meals or hosting gatherings. The intuitive control panel features easy-to-read dials and buttons that simplify the cooking process, providing clear visibility of settings and timers.

Another key characteristic of the SIE501 is its self-cleaning function, which utilizes a pyrolytic cleaning process. This feature heats the oven to extremely high temperatures, reducing food residues to ash that can be easily wiped away. This convenience saves users significant time and effort in maintaining a clean cooking environment.

Safety is also a priority in the design of the Tricity Bendix SIE501. It includes features such as a cool-touch door and automatic shut-off, ensuring that users can operate the oven without the risk of burns or accidents.

Overall, the Tricity Bendix SIE501 stands out in the market for its combination of advanced technology, efficiency, and style. With its multifunctional capabilities and user-centric design, this oven is an excellent choice for anyone looking to elevate their cooking experience while enjoying the benefits of modern kitchen appliances.