12
5. Select the Spin speed orRinse hold option
Depress the Spin (speed) button to choose the required
speed or Rinse hold option: the corresponding light
illuminates.
6. Select the required options
The light corresponding to the depressed button
illuminates.
7. Select the Delay Start option
To delay starting of a programme, press the Delay Start
button. The corresponding light illuminates. The figures
corresponding to the selected delay will be displayed for
about 3 seconds, after which the duration of the selected
programme will appear on the display.
When the Start/Pausebutton is pressed, the selected
delay will again appear on the display and the machine
starts its countdown.
Delay
start
Programme time
Prewash Quick
Half
load
Extra
rinse
Rinse
hold
Spin
900
700
500
1200
During this period it is possible to load other laundry:
press the Start/Pausebutton. Open the door. Load the
laundry. Close the door and press the Start/Pause
button again.
8. Start the programme
To start the selected programme, press the Start/Pause
button; the corresponding light stops flashing and the
Wash pilot light illuminates.
The pilot light corresponding to the wash phase which is
running is on.
The machine starts operating.
If the Delay Startoption has been selected the
programme will start at the end of the countdown.
9. At the end of the programme
The machine stops automatically. The display shows a
blinking zero. The light of the Start/Pausebutton goes
out and the End light illuminates.
If the Rinse hold option has been selected, the door will
be locked, the Rinse hold pilot light in the programme
progress display remains lit to indicate that the water
must be drained before opening the door. The display
shows a flashing zero.
To empty out the water you can after turning the
programme selector dial to Off position:
●select Drain programme, the water is emptied out
without spinning
●select Spin programme. Select the spin speed by
means of the relevant button and then depress the
Start/Pausebutton. The water is emptied out and the
laundry is spun at the selected spin speed.
At the end of the cycle, the light of the Start/Pause
button light goes out, and the End light illuminates. The
door can be opened.
Turn the programme selector dial to Reset Off.
Start/
Pause