Tricity Bendix TCM10 Preliminaries, Unpacking, The packing includes, Placement, Getting Started

Models: TCM10

1 8
Download 8 pages 9.72 Kb
Page 4
Image 4
Preliminaries

4

Preliminaries

UNPACKING

Remove all packaging from the appliance. Retain the packaging. If you dispose of it please do so according to any recycling regulations.

The packing includes

The Coffe Machine

Coffee Pot

Filter Basket and Plastic Mesh Filter

If items are missing or damaged, contact your nearest Tesco store for assistance.

Check that the voltage marked on the rating plate at the bottom of the appliance is the same as the voltage in your area.

Remove the coffee pot, filter holder and filter. Rinse them in cold water and allow to dry. Wipe the body with a barely damp cloth. Reassemble the unit.

PLACEMENT

Your Coffee Machine is designed to be permanently connected to the mains supply.

Locate the appliance in a secure area where it cannot easily be interfered with and out of the reach of children.

Place the unit on a stable, level dry surface within easy reach of a mains outlet. The mains cord should not be taut.

This coffee machine is designed to be permanentkly plugged into the mains. This is to allow the programmed AutoStart feature to operate which requires that the clock time is set. You may prefer to disconnect the appratus from the mains after use, but you will have to set the time if you wish to use the programmed auto-start feature.

GETTING STARTED

Press to set

Time/Status

Switch the mode

Hours

Indicators

ON/AUTO/OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press

to set

 

 

 

 

Press to select Clock and Auto

Minutes

 

 

 

 

Start Modes for time setting

Plug the Coffee

Maker into the mains point and switch on at the

 

 

mains point. The screen will light up and the colon will flash:

Setting the Time

Press the PROG button. The button will light blue and the word CLOCK appears in the display

The clock is a 24 Hr clock. To set 8:30 PM ,enter the time as 20:30.

Press the HOUR button. The button will illuminate Press the HOUR button until you reach “20”:

Press the MIN button. The button will illuminate Press the MIN button until you reach “30”:

Press the PROG button twice. The Word CLOCK will erase from the display. After a few seconds the PROG light will extinguish.

The time is now set.

Page 4
Image 4
Tricity Bendix TCM10 Preliminaries, Unpacking, The packing includes, Placement, Getting Started, Setting the Time