Care, Cleaning and Storage
After you have finished ironing:
Set the steam control to minimum.
Switch the iron off at the mains and unplug.
Stand the iron on its heel and let the iron cool down fully.Self Cleaning
This operation removes scale and impurities from the iron. We recommend using it every
Fill the reservoir to the MAX level. Set the steam control to “O”. Set the temperature knob to the highest temperature.
When the iron is cool: Invert the iron, open the filler and pour away the excess water from the tank.
When pouring away the water, gently shake the iron to remove any loose particles from the tank.
Care and Cleaning
Unplug the iron from the mains and allow it to cool down fully.
Cleaning: To remove starch or other deposits from the soleplate, apply a small amount of mild cleaner to a damp cloth, forming a paste on the cloth. Gently rub the soleplate, then wipe with a moist cloth.
The body of the iron may now be cleaned with a barely damp cloth and then dried thoroughly. Do not wet the appliance body, cord or mains plug.
CAUTION: Never use scouring pads, abrasives or harsh cleaners on the iron body or the soleplate.
Switch the iron on and and wait for the power light to turn off.
Unplug the iron from the mains.
Hold the iron horizontally over the sink. Press and hold the Self Clean button.
Steam and boiling water will drain from the holes on the soleplate washing away any deposits that have built up. Gently move the iron back and forth until the water tank is empty.
When