Auger
Control 
Jam Nut
Auger Control Cable 
Figure 5
Tire Pressure (Pneumatic Tires)
The tires are overinflated for shipping purposes.
•Check tire pressure. Maintain pressure between 10 and 14 psi.
NOTE: If the tire pressure is not equal in all tires, the unit may pull to one side or the other.
WARNING: Maximum tire pressure under any circumstance is 30 psi. Equal tire pressure should be maintained at all times. Excessive pressure (over 30 psi) when seating beads may cause tire/rim assembly to burst with force sufficient to cause serious injury.
SECTION 3: KNOWING YOUR SNOW THROWER
WARNING: Be familiar with all the controls on the snow thrower and their proper operation. Know how to stop the machine and disengage them quickly.
•Compare the figure below and description of controls in this section with your equipment before starting unit.
Traction Control/Auger Control Lock
Heated Grip Switch
Wheel Steering Control Shift Lever
Head Light
Gas Cap
Oil Fill
Discharge Chute
Chute
Tool
Chute Tilt Control 
Auger Drive Control
Chute Crank
Heated Grip
Steering
Control
Augers
Skid Shoe
Figure 6
7
