Replacing the Drive Belt

IMPORTANT: To aid in reassembly, note the orientation of the drive belt on the two idler pulleys and the engine flywheel pulley prior to performing the following steps. Refer to Fig. 6–3.

The edger drive belt is subject to wear and should be replaced if any signs of cracking, shredding or rotting are present. To replace the belt, proceed as follows:

1.Working in front of the edger, loosen the flange lock nut on top of frame, allowing the idler pulley assembly to pivot slightly out from the frame. See Fig. 6–3.

2.With your other hand, carefully reach under the rear of the unit and remove the belt from around the engine flywheel pulley. See Fig. 6–3.

3.Remove the spindle sheaves belt guard by removing the two self-tapping screws which secure it to the blade plate assembly. See Fig. 6–4.

4.Carefully remove the belt from off of the pulleys, again making sure to note the orientation of the belt. Discard the belt. See Fig. 6–4.

5.Working from the front of the edger, place the belt onto the spindle sheaves, route it back onto the two idler pulleys, and then place it onto the engine flywheel pulley.

IMPORTANT: Make certain that the “V” side of the belt is seated into the top pulley and the flat side of the belt is seated into the bottom pulley. See Fig. 6–3.

6.Reinstall the spindle sheaves belt guard with the self tapping screws removed earlier.

7.Make certain that the drive belt is on the engine flywheel pulley and idler pulleys, and retighten the flange lock nut on the top of the frame.

IMPORTANT: Make certain that the drive belt is seated correctly and that it is riding smoothly on the spindle sheaves and is not pinched between them. Repeat the first three steps if the belt is pinched.

WARNING: Never operate the edger without the spindle sheaves belt guard in place.

Flange lock nut

Engine flywheel pulley

Figure 6–3

Belt guard

Engine flywheel pulley

Figure 6–4

6

Maintaining

and Servicing

Your Edger

WARNING

Never operate the edger without the spindle sheaves belt guard in place.

NOTE: Specifications are subject to change without notification or obligation.

Images my not reflect your exact model and are for reference purposes only.

11

Page 10 Page 12
Page 11
Image 11
Troy-Bilt 554 manual Your Edger, Replacing the Drive Belt
Page 10 Page 12

554 specifications

The Troy-Bilt 554 is a powerful and reliable garden tiller designed to provide efficient soil cultivation for both novice gardeners and seasoned landscape professionals. This compact yet robust tiller combines cutting-edge technology with user-friendly features, making it an indispensable tool for anyone looking to enhance their gardening experience.

At the heart of the Troy-Bilt 554 is its engine. It is equipped with a 208cc OHV (Overhead Valve) engine that delivers ample power to break up tough soil with ease. The engine tends to run efficiently, ensuring a smooth operation while minimizing fuel consumption, which is a major advantage for extended gardening sessions. The tiller’s transmission system features a dual-gear design, offering greater versatility in operating speeds. This allows users to easily adjust the tilling depth, whether you're preparing a new garden bed or loosening compacted soil throughout your yard.

One of the standout features of the Troy-Bilt 554 is its 54-inch tilling width. This wide coverage allows for fewer passes over the same area, enabling quicker completion of tilling tasks. The counter-rotating tines are designed to penetrate the soil more effectively than conventional tines, resulting in better soil aeration and improved mixing of organic materials. This adds to the overall health of the soil and promotes stronger plant growth.

The tiller also boasts a user-friendly design, featuring adjustable handlebars that provide comfort for users of different heights. The adjustable depth stake enables precise control over tilling depth, making it a breeze to tailor the tilling process to your specific gardening needs. The robust construction of the Troy-Bilt 554 enhances its durability, ensuring that it can withstand the rigors of regular use in diverse soil conditions.

An additional benefit is the ease of transport and storage. The Troy-Bilt 554 is equipped with large, heavy-duty wheels that make maneuvering across uneven terrain straightforward. Safety features, such as an automatic shut-off mechanism, ensure that the tiller remains safe to operate.

In conclusion, the Troy-Bilt 554 stands out for its combination of power, versatility, and user-friendly design. It provides an excellent solution for efficient soil preparation, helping gardeners achieve a lush and thriving garden with ease. Whether you're planting a new garden or revamping existing beds, this tiller is engineered to deliver exceptional performance.
Top Page Image Contents