STEP 6: CHECK TRANSMISSION OIL LEVEL

The transmission was filled with gear oil at the factory. However, you should check the gear oil level at this time to make certain it is correct.

IMPORTANT: Do not operate the tiller if the gear oil level is low. Doing so will result in severe damage to the transmission com- ponents.

1.With the tiller on level ground, pull the Depth Regulator Lever (FF, Fig. 2-10) back and then all the way up until the lowest notch in the lever is engaged.

2.Remove the oil fill plug (GG, Fig. 2-11) from the transmission housing cover and locate the main drive shaft situated inside the housing.

3.The gear oil level is correct if the gear oil is approximately halfway up the side of the main drive shaft.

4.If the oil level is low, add gear oil by re- ferring to A. To Check the Transmission Gear Oil Level in Section 5.

FF

STEP 7: ADD MOTOR OIL

The tiller is shipped without oil in the en- gine.

IMPORTANT: Do not start the engine with- out first adding motor oil. Severe engine damage will result if the engine is run with- out oil.

1.Refer to the separate Engine Owner’s Manual for engine oil specifications and capacities.

2.With the tiller on level ground, move the Depth Regulator Lever (FF, Fig. 2-10) up or down until the engine is level.

3.Add motor oil as described in the En- gine Owner’s Manual.

4.Move the Depth Regulator Lever all the way down until the highest notch is en- gaged. This places the tines in the “travel” position, which allows the tiller to be moved without the tines touching the ground.

STEP 8: CHECK HARDWARE

Check all nuts and screws for tightness.

STEP 9: CHECK AIR PRESSURE IN TIRES (units with pneumatic tires)

Check the air pressure with a tire gauge. Deflate or inflate the tires equally to be- tween 15 PSI and 20 PSI (pounds per square inch). Be sure that both tires are in- flated equally or the unit will pull to one side.

Fig. 2-10: Adjust Depth Regulator Lever.

GG

Fig. 2-11: Remove gear oil fill plug.

IMPORTANT: This completes the assembly steps. Be- fore operating your tiller, make sure you read the follow- ing sections in this Manual, as well as the

separate Engine Owner’s Manual:

•Section 1: Safety

•Section 3: Features and Controls

•Section 4: Operation

9

Page 8 Page 10
Page 9
Image 9
Troy-Bilt 640C-Tuffy CRT manual Check Transmission OIL Level, Check all nuts and screws for tightness
Page 8 Page 10

640C - Tuffy CRT, 644A - Super Bronco CRT, 640C-Tuffy CRT, 640C-Tuffy specifications

The Troy-Bilt 640C-Tuffy and the 644A-Super Bronco CRT are exemplary models in the realm of cultivators and tillers, merging robust performance with user-friendly features. These machines are designed to make garden preparation easier and more efficient, catering to both amateur gardeners and seasoned horticulturists alike.

The Troy-Bilt 640C-Tuffy boasts a powerful engine and features a rear-tine design, enabling the user to tackle tough soil with ease. One of its main features is the Carbide Tines that effectively break up hard ground and aerate the soil, promoting healthy growth. The 640C-Tuffy is sturdy, with durable construction that ensures longevity and resilience against tough garden conditions. It also includes a 10-inch tilling width, allowing it to cover substantial ground in shorter periods. Moreover, the model is equipped with adjustable tilling depth settings, accommodating various types of gardening tasks from breaking new ground to preparing existing beds.

On the other hand, the 644A-Super Bronco CRT highlights innovative technology that makes tilling a breeze. This model features counter-rotating tines which effectively mix compost and soil, offering improved mixing and aeration. The 644A is known for its robust performance, powered by a reliable engine, which delivers consistent torque even on challenging soil types. Additionally, its 18-inch tilling width allows for broader coverage, resulting in efficient garden preparation.

Both models are equipped with ergonomic handlebars designed for operator comfort. These handlebars are adjustable, allowing users of different heights to find a comfortable grip, thus reducing fatigue during extended use. The 640C-Tuffy and 644A-Super Bronco CRT are designed with ease of operation in mind, featuring intuitive controls and a lightweight design that makes maneuvering effortless.

In terms of maintenance, both models boast easily accessible components which allow for simple servicing and routine upkeep, ensuring long-lasting performance. Additionally, these cultivators are built with safety features, including protective shields that guard against debris.

In summary, the Troy-Bilt 640C-Tuffy and 644A-Super Bronco CRT shine in their ability to combine cutting-edge technology, user-friendly operation, and robust design, making them ideal choices for anyone looking to enhance their gardening experience. Whether preparing a new garden bed or maintaining an existing one, these cultivators are engineered to deliver exceptional results with ease and confidence.
Top Page Image Contents