Troy-Bilt 650 Controls and Features, Engine Controls, Wheel Drive Pins, Forward Clutch Bail, Handlebar Height Adjustment, Gas Cap, Reverse Clutch Lever, Oil Fill

Controls and Features 4

Reverse Clutch Lever

Forward Clutch Bail

Depth Regulator

Handlebar

Gasoline FillHeight

Adjustment

	Tines
	Wheel Drive Pin
Recoil Starter	Oil Fill
	Figure 4-1
Engine Controls	Depth Regulator Lever

For detailed information on all engine controls refer to the seperate Engine Operator’s Manual.

Wheel Drive Pins

Each wheel is equipped with a wheel drive click pin that secures the wheel to the wheel shaft. The wheels can be positioned in either a WHEEL DRIVE or a FREEWHEEL mode.

Forward Clutch Bail

The forward clutch bail controls the engagement of the forward drive of the wheels and tines.

This lever controls the tilling depth of the tines. Pull the lever back and slide it up or down to engage the notched height settings.

Handlebar Height Adjustment

The handlebar height is adjustable to three different settings. In general, adjust the handlebars so they are at waist level when the tines are 3-4” in the ground.

Gas Cap

Unthread the gas cap to add gasoline to the fuel tank.

Reverse Clutch Lever

The Reverse Clutch Lever controls the engagement of reverse drive to the wheels and tines.

Oil Fill

Engine oil level can be checked and oil added through the oil fill.

9