4.Remove all dirt and clean the area around the transmission cover. See Fig. 7-3.

Hex Screw

Transmission

Cover

Transmission

Housing

Figure 7-3

5.Remove the four hex screws (5⁄16-18 x .75) securing the transmission cover to the drive shaft and remove the cover. See Fig. 7-3

6.Remove the left-side wheel. Tilt the left-side wheel shaft into a drain pan and allow the gear oil to drain through the top of the transmission.

7.Reinstall the wheel and reinstall the transmission cover.

8.Refill the transmission using Mobil 1® Synthetic 75W 140. Refill the engine with motor oil and replenish the fuel tank with gasoline.

9.Reinstall the belt cover.

18Section 7— Service