IMPORTANT: Mowing in reverse is not recommended.

WARNING: Use extreme caution while operating the tractor in the REVERSE CAUTION MODE. Always look down and behind before and while backing. Do not operate the tractor when children or others are around. Stop the tractor immediately if someone enters the area.

To use the REVERSE CAUTION MODE:

IMPORTANT:The operator MUST be seated in the tractor seat.

1.Start the engine as previously instructed in this Operator’s Manual.

2.Turn the key from the NORMAL MOWING (Green) position to the REVERSE CAUTION MODE (Yellow) position of the key switch module. See Figure 8.

3.Depress the REVERSE PUSH BUTTON (Orange, Triangular Button) at the top, right corner of the key switch module. The red indicator light at the top, left corner of the key switch module will be ON while activated. See Figure 8.

4.Once activated (indicator light ON), the tractor can be driven in reverse with the cutting blades (PTO) engaged.

5.Always look down and behind before and while backing to make sure no children are around.

6.After resuming forward motion, return the key to the NORMAL MOWING position.

IMPORTANT: The REVERSE CAUTION MODE will remain activated until:

a.The key is placed in either the NORMAL MOWING position or STOP position.

b.The operator leaves the seat (Models with Electric PTO ONLY).

c.The operator engages the parking brake by fully depressing the brake pedal and holding it down while gently pushing the parking brake button inward (Models with Manual PTO ONLY).

SETTING THE CUTTING HEIGHT

Select the height position of the cutting deck by placing the deck lift lever in any of the six different cutting height notches on the right side of the fender. Then adjust the deck wheels so that they are between ¼-inch and ½- inch above the ground when the tractor is on a smooth, flat surface such as a driveway.

WARNING: Keep hands and feet away from the discharge opening of the cutting deck.

 

Reverse

Indicator

Push

Button

Light

 

 

Reverse

Stop

Caution Mode

Position

Position

 

 

Start

 

Position

Figure 8

NOTE: The deck wheels are an anti-scalp feature of the deck and are not designed to support the weight of the cutting deck.

Refer to the ADJUSTMENTS section of this manual for more detailed instructions regarding various deck adjustments.

STARTING THE ENGINE

WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

NOTE: Refer to the TRACTOR SET-UP section of this manual for Gasoline and Oil fill-up instructions.

•Insert the tractor key into the ignition switch.

•Place the PTO knob (or lever) in the disengaged (Blade Stop) position.

•Engage the tractor’s parking brake.

•Place the throttle control in the FAST (rabbit) position.

•Pull the choke control outward.

•Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the NORMAL MOWING position.

IMPORTANT: Do NOT hold the key in the START position for longer than ten seconds at a time. Doing so may cause damage to your engine’s electric starter.

NOTE: If starting problems are encountered, refer to the TROUBLESHOOTING section of this manual.

•After the engine starts, deactivate the choke control.

NOTE: Do NOT leave the choke control on while operating the tractor. Doing so will result in a "rich" fuel mixture and cause the engine to run poorly.

15

Page 14 Page 16
Page 15
Image 15
Troy-Bilt 772C0748 manual Setting the Cutting Height, Starting the Engine, To use the Reverse Caution Mode
Page 14 Page 16

772C0748 specifications

The Troy-Bilt 772C0748 is a powerful and versatile rotary lawn mower designed for maintaining a pristine lawn with ease. Known for its durability and efficiency, this model is tailored for homeowners who seek a reliable solution for their mowing needs.

One of the standout features of the Troy-Bilt 772C0748 is its strong engine. Equipped with a robust 159cc engine, this mower delivers impressive cutting performance and allows for efficient operation over a variety of terrains. The engine is designed for easy starting, minimizing the hassle often associated with lawn maintenance.

The mower boasts a 21-inch cutting deck, which offers a balance between maneuverability and cutting width. This size is ideal for residential lawns, allowing users to navigate through narrow paths and tight corners with ease. The cutting deck is made from durable materials, ensuring longevity and resilience against the rigors of outdoor use.

Another notable characteristic of the Troy-Bilt 772C0748 is its adjustable cutting height feature. With six different height settings, users can achieve their desired lawn length with precision. This flexibility is essential for accommodating different grass types and seasonal growth patterns, ensuring a well-maintained lawn throughout the year.

The mower’s design also prioritizes user comfort. It features an ergonomic handle that reduces strain during operation, allowing for longer mowing sessions without discomfort. The handle is also foldable, which not only saves storage space but also enhances portability.

In terms of technology, the Troy-Bilt 772C0748 incorporates a reliable grass collection system. The rear bagging capabilities allow for efficient collection of clippings, which can be easily emptied, promoting a cleaner mowing experience. The mower also has side discharge capabilities, providing options for lawn maintenance according to user preferences.

Overall, the Troy-Bilt 772C0748 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. Its durable construction, innovative technology, and thoughtful design characteristics position it as a standout option in the competitive lawn mower market. Whether tackling small patches or larger areas, the Troy-Bilt 772C0748 promises to deliver consistent performance and a beautiful, well-groomed lawn.
Top Page Image Contents