3 1

Setting Up

Your Snow

Thrower

NOTE: References to right or left side of the snow thrower are deter- mined from behind the unit in the operating position.

NOTE: This Operator’s Manual covers several models, handle panels, lights and chute cranks are some features that may vary by model.

Not all features refer- enced in this manual are applicable to all snow thrower models.

NOTE: Two replace- ment auger shear pins are included with this manual (or stowed

in the plastic handle panel). Refer to Augers in the Maintainance Section for more information regarding shear pin replacement.

 

IMPORTANT: The snow thrower is shipped with oil

 

and WITHOUT GASOLINE. After assembly, refer to

 

separate engine manual for proper fuel and engine oil

 

recommendations.

 

1.

Observe the lower area of the snow thrower to be

 

sure both cables are aligned with roller guides before

pivoting handle upward.

 

 

 

a. Pull up and back on upper handle as shown in

 

 

Figure 1. Align upper handle with the lower handle.

 

 

b. Tighten hand knobs securing upper handle to

 

 

lower handle.

 

2.

Remove wing nut and hex screw from chute control

 

 

assembly and clevis pin and cotter pin from chute

 

 

support bracket. See Figure 2. Position the chute

 

 

assembly (forward-facing) over the chute base.

 

3.

Place chute assembly onto chute base and secure

 

 

chute control assembly to chute support bracket with

 

 

clevis pin and cotter pin removed earlier. See Figure 3.

Figure 1

 

 

 

2

3

Figure 2

Figure 3

 

6

Page 6
Image 6
Troy-Bilt 772C0781 warranty Setting Up Your Snow Thrower, Recommendations, Pivoting handle upward, Lower handle

772C0781 specifications

The Troy-Bilt 772C0781 is a robust and versatile push lawn mower designed to meet the demands of homeowners seeking an efficient lawn care solution. This model combines power, precision, and ease of use, making it a favorite among gardening enthusiasts.

One of the standout features of the Troy-Bilt 772C0781 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it provides the necessary torque and performance to tackle various lawn conditions. The engine’s dependable performance ensures that the mower can efficiently handle both thick grass and uneven terrain, granting users the ability to maintain their lawns with ease.

The cutting deck on the Troy-Bilt 772C0781 is designed for optimal performance. With a 21-inch steel cutting deck, this mower provides a wide cutting path, allowing users to cover more ground in fewer passes. Additionally, the deck features a versatile three-in-one cutting system, enabling users to choose between mulching, rear bagging, or side discharge options. This versatility empowers homeowners to adapt to different lawn care needs throughout the seasons.

User comfort and control are significantly enhanced by the adjustable height feature. The mower allows for six different cutting height positions, ranging from 1.25 inches to 3.75 inches. This customization helps users achieve the desired look for their lawns while promoting healthy grass growth. Furthermore, the ergonomic handle design is equipped with cushioned grips, reducing fatigue during extended mowing sessions and enhancing the overall mowing experience.

Another impressive aspect of the Troy-Bilt 772C0781 is its ease of maintenance. The mower features an easy-to-access oil fill and a simple blade height adjustment mechanism, making routine upkeep straightforward for users. This focus on user-friendly design extends to its overall construction, with a durable steel frame designed to withstand the rigors of regular lawn maintenance.

In conclusion, the Troy-Bilt 772C0781 stands out as a powerful and versatile lawn mower equipped with essential features and technologies designed for user convenience. Whether tackling a small yard or a more substantial lawn, this mower provides the performance, comfort, and customization that every homeowner looks for, ensuring a well-manicured lawn all season long.