Parking Brake Adjustment
WARNING: Never attempt to ad- just the brakes while the engine is running. Always disengage PTO, move shift lever into neutral posi- tion, stop engine and remove key to prevent unintended starting.
If the tractor does not come to a complete stop when the brake pedal is completely depressed, or if the tractor’s rear wheels can roll with the parking brake applied, the brake is in need of adjustment. The brake disc can be found on the right side of the transmission in the rear of the tractor. Adjust if necessary as follows:
1.Looking at the transmission from the right side of the tractor, locate the compression spring and brake disc. See Figure 12.
2.Loosen, but do NOT remove, the hex nut found on the right side of the brake assembly. See Figure 12.
3.Using a feeler gauge, set the gap between the brake disc and the brake puck at .011”.
4.
Seat Adjustment
WARNING: Before operating this machine, make sure the seat is engaged in the seat stop, stand behind the machine and pull back on seat until fully engaged into stop.
Knob Adjustment Seat
To adjust the position of the seat on models so equipped, loosen the two knobs on the bottom of the seat. See Figure 13. Slide the seat forward or backward as desired. Retighten the two knobs.
����������������
�������
Figure 12
Figure 13
5
Adjusting
Your Lawn
Tractor
WARNING
Never attempt to adjust the brakes while the engine is running. Always disengage PTO, move shift lever into neutral position, stop engine and remove key to prevent unintended starting.
Before operating this machine, make sure the seat is engaged in the seat stop, stand behind the machine and pull back on seat until fully engaged into stop.
17
