SAFETY LABELS FOUND ON YOUR UNIT
SECTION 2: ASSEMBLING YOUR CHIPPER SHREDDER
IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the Briggs & Stratton Owner/ Operator manual packed with your unit. before operating your machine.
Loose Parts In Carton
•Tow Bar (Model CS4210 Only)
•Debris Collection Bag
•Safety Glasses
•Engine Oil
Lowering the Chipper Chute
For shipping reasons, the unit is crated with its chipper chute in a raised position. To pivot it downward, proceed as follows:
•Pull the spring latch upward and gently pivot the chipper chute down until it clicks into the lock rod. See Figure 1.
1. |
Spring Latch |
2. |
Lock Rod |
Figure 1
WARNING: Never operate the chipper shredder with the chipper chute in the raised position. Doing so may result in property damage or serious injury to the operator or bystanders.
5
