Removing the Flail Screen

If the discharge area becomes clogged, remove the flail screen and clean area as follows:

1. Stop the engine. Make certain the chipper/shredder vacuum has come to a complete stop.

2.Before unclogging the discharge chute, disconnect and ground the spark plug wire to retaining post.

3.Remove the vacuum bag from the unit as instructed in the OPERATION section to obtain access to flail screen.

4.Remove self tapping screw on right side of unit that attaches to the flail screen. See Figure 6-2.

5.Remove hex screw on top of rear housing near mounting

bracket and the flange lock nut that secures flail screen. See Figure 6-2.

6. Remove and clean the screen by scraping or washing with water. See Figure 6-3.

7.Reinstall the screen.

Figure 6-2

Figure 6-3

14Section 6— Maintenance & Adjustments