MAINTENANCE & REPAIR INSTRUCTIONS

CLEANING

Use a small brush to clean off the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic housing or handle. Wipe off any moisture with a soft cloth. Also keep the air vents free of obstructions.

STORAGE

•Allow the unit to cool before storing.

•Lock the unit to prevent unauthorized use or damage.

•Store the unit in a dry, well-ventilated area.

•Store the unit out of the reach of children.

Hanger

Holes

Release

Button

To Use the Hanger

To use the hanger, make sure that the attachment is removed from the unit.

1.Place the hanger on the end of the attachment and slide down until it touches the release button (Fig. 10).

2.Press the release button and hold it in.

3.Slide the hanger over the depressed release button.

4.Adjust the hanger so that the release button clicks into the any of the holes in the hanger.

Fig. 10

TRANSPORTING

•Allow the unit to cool before transporting.

•Secure the unit while transporting.

ACCESSORIES/REPLACEMENT PARTS

Replacement line can be purchased from Troy-Bilt dealers:

.105-inch Spiral Line . . . . . . . . . . . . . . . . . . . . . .49UFSHLK953

TROUBLESHOOTING

CUTTING ATTACHMENT WILL NOT CUT

C A U S E

Cutting attachment bound with grass Cutting attachment line is broken or too short Shift lever is in blower mode

A C T I O N

Stop the unit and clean cutting attachment Refill with new line

Move the shift lever to trim mode

NOTE: For repairs beyond the minor adjustments listed above, call 1-800-828-5500if in the United States or 1-800-668-1238if in Canada to obtain a list of qualified service dealers.

 

SPECIFICATIONS

 

 

 

 

DRIVE SHAFT AND CUTTING HEAD

 

 

 

Drive Shaft............................................................................................................................................................................................

Steel

Unit Weight.................................................................................................................................................................

4 lbs. 15 oz. (2.24 kg)

Cutting Mechanism ..........................................................................................................................................................

Fixed Line Head

Line Type.................................................................................................................................................

.105 inch (2.667 mm) Spiral Line

Cutting Swath ...................................................................................................................................................................

16 inches (40.64 mm)

7