user manual
FRONT PANEL FUNCTIONS
| 2 4 | 5 | 7 |
| 8 | 11 | 12 |
|
| POL |
|
|
|
|
|
1 3 | 6 |
|
| 9 | 10 | 13 |
|
1.Mono Band 1 – sums the Left and Right Band signals together (up position) and feeds them in mono to both Band 1 outputs.
2.Limiter cancel – disables all limiter functions and causes the LIMITER CANCEL LED to light.
3.Power Standby switch – determines the
4.Remote Standby cancel – enables (down position) or disables (up position) the REMOTE STANDBY function. Inoperable if the remote stanby function has not been wired up.
5.Phase adjustment – variable adjustment between 0° and 180°.
6.Gain trim – allows the band 1 gains and band 3 gains to be adjusted to match band 2 where speaker/amplifier sensititvities vary for each band.
7.Polarity – reverses the polarity of the selected frequency band.
8.Mute LED – indicates mute staus of the selected channel.
9.Mute key – one latching mute switch per output channel. Press to mute; press again to un- mute.
10.Output meters – LED ladder displays headroom before limiting occurs. The lower four green LEDs indicate
11.Power – green LED indicates that power is applied to the unit.
12.Standy Mute – red LED indicates when the standby mute mode is set.
13.Limiter Cancel – indicates when the limiter cancel mode is set.
Page 6