Turbosound TQ-425, TQ-230, TQ-445, TQ-310, TQ-308, TQ-115, TQ-315 user manual QLight series

user manual

QLight™ series

Single point mount options include a universal FB-12 flybar assembly for use with the TQ-445 and this enables the use of several different fixing methods. The illustration at right shows the FB-12 with three different methods of suspending the TQ-445 cabinet: a unilock fitting; a scaffold clamp; and a pick-up point adapter.

To attach the flybar first remove the threaded plastic plugs filling the rigging points on the top of the cabinet. Fit the flybar to the cabinet using the captive M10 shoulder eyebolts supplied with the flybar assembly. There are 12 attachment points equally spaced along the length of the spine of the flybar. Depending on which point is chosen for the given attachment system, a wide range of downward inclination angles can be achieved over a range of approximately 70 degrees. The design of the flybar even allows for upward angles, for example for coverage of balconies that are higher than the loudspeaker location.

The FB-12 flybar assembly comes supplied with a U-6 Unilock fitting,

which provides a single attachment point. The point at which the Unilock is attached to the flybar determines the vertical angle of the loudspeaker as shown in the table following.

A pick-up point adapter offers a further single attachment point. This option provides fast adjustment of vertical angle. The point at which the eyebolt adapter is attached to the flybar determines the vertical angle of the loudspeaker as shown in the table following.

An aluminium scaffold clamp is attached to the fly bar by means of a simple clevis coupler. It is designed to rotate horizontally through 360° in order to enable accurate positioning of the loudspeaker. The point at which the scaffold clamp is attached to the fly bar determines the vertical angle of the loudspeaker as shown in the table following.

TQ series manual page 15