Turtle Beach Riviera INSTALLING THE DRIVERS AND SOFTWARE, Next, SETUP.EXE, My Computer, Add New Hardware Wizard, Turn on the PC. After Windows has booted, if the “

WWW.TURTLEBEACH.COM

Remove the rear bracket Gently install the sound card

6.Replace the PC’s cover, reconnect the power cord and peripherals. Connect your powered speakers, microphone, and any other audio peripherals to the appropriate inputs and outputs on the sound card.

INSTALLING THE DRIVERS AND SOFTWARE

After inserting Riviera into a free PCI slot, install the drivers and software by following these instructions:

ÂThe Riviera CD will launch automatically only if the Auto-Insert Notification option is enabled for your CD-ROM drive. If the installation menu does not appear after inserting the CD into your CD ROM drive, browse to the drive letter that contains the CD, run ‘SETUP.EXE’, then return to the installation instructions.

1.Connect your powered speakers, microphone, and any other audio peripherals to the appropriate inputs and outputs on the Riviera.

2.Turn on the PC. After Windows has booted, if the “Add New Hardware Wizard” is displayed, click on the Cancel button to end this process.

ÂIt is important that you click on Cancel at this screen to properly install your sound card drivers.

3.Insert the Turtle Beach Installation CD into the CD ROM drive. If the installation menu does not appear within 30 seconds, click on the “My Computer” icon, double-click on the CD-ROM drive icon to open it, and run ‘SETUP.EXE’.

When the Riviera installation screen appears, click Next to proceed, then follow the on-screen instructions.

7 Riviera