11S1472-001-01 http://www.tyan.com
Reset Connector: J49 Pinout Assignment
1Power Good
2Ground
Turbo LED Connector: J51 Pinout Assignment
1Cathode
2Anode
Flash EPROM: J46
This jumper should be left at the factory default.
J46 1-2
Keylock Connector: J52 Pinout Assignments
1Led Output
2No Connect
3Ground
4Keylock
5Ground
CMOS Resest/Password Reset: J38(Default off)
If you forget your CMOS password or need to reset the
CMOS registers, just power off the system and close
jumper J38 for five seconds. Then open jumper J38 and
power on the system. This will set the CMOS and password
back to the system default.