16
H O M E A U T O M A T I O N
To switch the thermostat to a different Thermostat Mode, press [3]. The system prompts:
“The Thermostat Mode is Off/Cool/Heat/Automatic.
To change, press [1].
To exit, press [#].”
To change the fan setting, press [4]. The system prompts:
“The fan is On/Automatic.
To change, press [1].
To exit, press [#].”
6.7 Accessing Temperature Control from an LCD5500Z Keypad
If you have an LCD5500Z keypad on your system, you can access the temperature control
menu from there:
1. Press [✱]
2. Use the <> buttons to scroll to the "Thermostat Ctrl" menu.
3. Press [✱].
4.Use the <> buttons to scroll to the thermostat whose settings you want to change. When
the desired thermostat is displayed, press [✱].
5. You can now select any of five options:
• Set Temperature
• Occupancy Setting
• Thermostat Mode
• Fan Control
• Keypad View
The first four options allow you to change the settings on the currently selected
thermostat, in a similar manner to the Escort5580TC menus described in section 6.6.
Use the Keypad View option to determine which thermostat's indoor/outdoor temperature
to display on the keypad. The keypad will display the temperature when it is not in use.
Each keypad can be programmed to display the temperature of a different thermostat.
6.To exit the Thermostat Control menu, press [#].
6.8 Video Camera Triggering
The Escort5580TC can be used to remotely control the triggering of video cameras. This
can only be done with security systems that have cameras connected to them via a
PC5108L module (ask your installer for more details). The Video Camera Triggering feature
will cause cameras to take pictures according to a sequence (or script) that has been
programmed in the PC5108L module.
To access this feature, access your system remotely (Section 2.2—Remote Access).
Press [✱], then [8]. Your system will prompt:
"Enter your access code."
Enter your [access code]. The system will announce:
"Goodbye."
The system will then hang up so that the PC5108L can run the programmed script.