Tyco S3010 manual Base Station, Battery Management, Physical, Functionality

CEM/B/012 Rev I

Product Highlights

Base Station

The S3010 base station provides a two-way communication interface between the reader and the AC2000 central computer or the webEntry controller. This allows card IDs to be loaded from the central computer or the webEntry controller to the reader database and stored transactions to be transferred back to the central computer. The database will expire after 24 hours, which means that the reader must be returned to the base station to ensure that data is kept current. The base station also provides battery management circuitry.

Battery Management

Four user replaceable rechargeable NiMH cells are held in an external compartment. These provide operational power for up to twenty hours of continuous use.

In order to extend battery life, the reader will enter Powersave Mode after a period of inactivity. The time delay from the last operation and shut down is user configurable, between 1 and 99 minutes. The reader can be re-activated by simply pressing the “Start” button on the keypad. When the reader is plugged into the base station, the batteries are “fast charged” if necessary under both temperature and voltage control.

TECHNICAL SPECIFICATIONS

PHYSICAL
Size
- Reader Enclosure	(max. including Wiegand Head)
	240 x 100 x 100mm (9” x 4” x 2”)
- Base Enclosure	210 x 100 x 100mm (8” x 4” x 4.33”)
Weight	Reader less than 1 kg (2.2lbs)
	Base Station less than 400g (1lb)
Housing	ABS Plastic Case
Colour	Light Grey
Power
- Voltage	9 – 15Vdc
- Current
Consumption	140mA (passive), 250mA (peak)
Power
- Reader Power	Charging Current Consumption: 1.1A
	Active Consumption: 60mA
	Power Save Mode: Minimal
- Base Station	When charging batteries:
	1.4A, 10Vdc
- Charge Time	30 to 50 minutes, overcharge
	protected
- Fully charged	Usage 9-20 hours depending on
	read head
- Battery Type	1.2V NiMH rechargeable batteries
- Battery Charging Pins	User Replaceable
LCD Display	4 line by 16 character display with
	backlight
Keypad	21 key membrane keypad.

FUNCTIONALITY
Memory	2MB
Database
- Cardholders	Storage of up to 130,000
	cardholders on the handheld reader.
- Transactions	Up to 2,000 transactions in offline
	operation.
Read Head Specification
- Card Motion	Manual swipe/Insert/Presentation
	(depending on head used)
- Available Head	All Wiegand encoded cards
Technologies	Magnetic stripe IS02
	Barcode using external reader
	Proximity
	Smart Card
Configuration	Operational parameters are
	downloaded from host controller via
	the base station. Some
	configuration setting can also be
	set using the keypad.
Communication Interface
Base Station Communications	Bi-directional optical link between
	reader and base station
Product Codes
RDR/032/201	S3010 Portable Reader (MiFare)
RDR/032/101	S3010 Portable Reader (Prox)
RDR/039/100	S3010 Portable Reader Base

Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of their companies.

CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland	www.cemsys.com
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: cem.sales@tycoint.com