Tyco Electronics ET1215L, B1ET-1215L manual OSD Control Options

OSD Control Options

Control	Description
Brightness	Increases or decreases brightness
Contrast	Increases or decreases contrast
H-Position	Moves the screen left or right
V-Position	Moves the screen up or down
Phase	Increases or decreases the snow noise of the image after auto
	adjustment is made.
Clock	The dot clock is fine-adjusted after auto adjust.
OSD H-Position	Moves the OSD position horizontally on the screen. When the
	button is pressed, the OSD control menu will move to the right
	side of the screen. Likewise, when the button is pressed, the
	OSD control menu will move to the left side.
OSD V-Position	Moves the OSD position vertically on the screen. When the
	button is pressed, the OSD control menu will move to the top side
	of the screen. Likewise, when the button is pressed, the OSD
	control menu will move to the lower side.
Color Balance	Press or to select 9300, 6500, 5500, 7500 and USER. Only when
	selecting USER can you make adjustments to the R/G/B content.
	Press Enter to restore to factory default setting.
Auto-Adjust	Press Auto to enable this function. The Auto-Adjust will automatically
	adjust V-Position, H-Position, Clock and Clock-Phase.
Recall Defaults	Returns the monitor to its default settings.
OSDLanguage	Select from English, French, German ,Spanish and Japanese.
Information Description	Indicates the current resolution, H-Frequency and V-Frequency.

3-20 User Guide