U-Line 3018 CLR 115 V / 60 Hz Control Quick Guide, First Use, Quick Start Guide, Zone Toggle

QUICK START GUIDE

u-line.com

Control Quick Guide

Actual Display:

			Up		Zone Toggle
						Select
			ICE PRODUCTION
			Down			Power
				U-Select Lighting
Control Function Guide:
FUNCTION	COMMAND			DISPLAY/OPTIONS
OFF	Press	and hold		Display will count down from 5 to off.
ON	Press	and release		Unit will come on immediately.
Adjust lighting	Press	to adjust lighting		Press	or	to set low, medium or high.
Customer menu	Press	and hold for 5 seconds		Press	or	to scroll through menu.
Service menu	Press	or	and hold for 5 seconds	Press	or	to scroll through menu.

First Use

All U-Line controls are preset at the factory. Initial startup requires no adjustments.

NOTICE

U-Line recommends discarding the ice produced during the first two to three hours of operation to avoid possible dirt or scale that may dislodge from the water line.

When plugged in, the unit will begin operating under the factory default setting. Follow the on screen prompt for language selection and temperature units.

To turn the unit off, press and hold for 5 seconds and release. The display will show a countdown to switching the unit off.

To power your unit on, simply press . The unit will immediately switch on.

Ice

ICE CUBE THICKNESS ADJUSTMENT

NOTICE

Ice thickness adjustment should only be made one increment at a time. Allow ice maker production to stabilize for 24 hours before rechecking ice thickness.

Remove all ice from the storage bin.

Ice cubes in any given batch will vary, so it is necessary to choose cubes from the sample area for comparison when making adjustments.

The ice cube thickness is factory set for best overall performance. The factory setting “0” is designed to maintain an ice bridge of approximately 1/16" to 1/8"

(1.6 mm to 3.2 mm) under normal conditions, resulting in a dimple of approximately 1/4" to 1/2" (6.4 mm to

8