User’s Manual

STORAGE, VACATION AND MOVING

If the unit is to be stored, moved or not used for extended periods, it will be necessary to drain the system of water.

!WARNING

Electrical Shock Hazard. Disconnect power before servicing. Before operating replace all panels. Failure to do so can result in death or electrical shock.

1.Disconnect power from the unit.

2.Remove ice from the storage bin.

3.Shut off water supply at the main water source.

4.Disconnect the inlet and outlet lines to the water valve and allow them to drain.

NOTE

Back panel must be removed prior to disconnecting the water lines.

!WARNING

If the ambient temperature is expected to drop below 45°F, drain all water from the unit to prevent freezing damage not covered by the warranty.

NOTE

The use of anti-freeze or other products of this nature is not necessary and is not recommended.

5.Reconnect inlet and outlet lines to the water valve.

6.Replace back panel.

7.Drain water from the water trough and drain line by removing the overflow tube (see Figure 34).

34