Design ■ Features ■ Performance

INTRODUCTION

NEW CLR2060 CONTROL BOARD DESIGN

Models Manufactured After 12/1/03

U-Line has started manufacturing the CLR2060 with a revised electronic control board. The new control board design is similar to the control board used on the CLRCO2075 Clear Ice Maker/Refrigerator.

This new board will have the advanced diagnostics that the CLRCO board has and the components can be tested in the same manner. This features a diagnostic LED and has 2 thermistors, one on the liquid line and one in the bin.

Note: The new board is NOT interchangeable in units with the original board. Also, in the case of a defective board, the board must be changed along with the thermistors, since they are matched to the board.

There is no display box installed on the CLR2060, however a display box from the CLRCO2075 will fit on this board. It can be used to read the bin temperature and the liquid line temperature.

E_SP-001

E-SP-002

The board is mounted in the lower front section of the CLR2060 Clear Ice Maker and is accessed by removing the service panel.

97