Ice machine cleaner is used to remove lime scale and other mineral deposits. Refer to the following steps for mineral deposit removal.
The refrigerator side does not operate during the ice maker cleaning cycle. Remove all fresh food to prevent spoilage.
CAUTION
Never use anything to force ice from the evaporator. Damage may result.
Always remove perishables before cleaning.
1.Set the cycle selector switch to OFF and allow the ice to melt off of the evaporator.
2.Remove all ice from the storage bin.
3.Remove inside front cover (Figure 37).
FRONT COVER
4.Remove the overflow tube
by lifting it up while using a slight back and forth motion to loosen it from the drain hole (Figure 38). The water in the reservoir will flow down the drain.
5.Replace the overflow tube after all of the water has drained from the reservoir.
6.Move the cycle selector switch to the CLN position.
7.When water begins to flow over the evaporator (approxi- mately 3 minutes), add one package of
8.Reinstall inside front cover.
UL208
Figure 37
OVERFLOW
CLRCO012
Figure 38
33