TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
If the unit appears to be malfunctioning, read through NORMAL OPERATION first. If the problem persists, check the TROUBLESHOOTING GUIDE. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem could be something very simple which can be solved without a service call.
TROUBLESHOOTING GUIDE
! DANGER !
ELECTROCUTION HAZARD
NEVER attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected.
Troubleshooting — What to check when problems occur
Problem | Possible Cause | Remedy |
No interior light. | No power to unit. | Make sure power cord is |
|
| plugged in. |
| Loose or burned out bulb. | Tighten or replace bulb. |
|
| See page 36 for light |
|
| replacement instructions. |
Unit does not | Cycle Selector Switch | Turn switch to ON. |
operate. | in OFF position. |
|
Temperature |
|
|
Controller |
|
|
displaying. |
|
|
Unit does not | No electrical supply. | Plug unit in or check |
operate. |
| circuit breaker. |
Switch is ON. |
|
|
Temperature |
|
|
Controller |
|
|
not displaying. |
|
|
|
|
|
39