User’s Manual
Problem | Possible Cause | Remedy | |
Unit produces | Low water level. | Check to see that | |
shallow or |
| overflow tube is fully | |
incomplete cubes, |
| seated. | |
or the ice fill | Hot incoming water. | Connect the unit to a | |
pattern on the |
| cold water supply. | |
evaporator is |
| Refer to INSTALLATION. | |
incomplete. |
|
| |
Incorrect incoming | Water pressure must | ||
| |||
| water pressure. | be | |
| Unit is not level. | Refer to LEVELING THE | |
|
| UNIT. | |
Water leaking | Supply line leaking. | Check to see that water | |
from under the |
| inlet line is attached | |
unit. |
| properly. Refer to | |
|
| CONNECTING THE | |
|
| WATER SUPPLY. | |
| Bin drain leaking. | Check integrity of bin | |
|
| drain hose and clamp. | |
Ice storage bin | Obstructed drain. | Check to see that | |
full of water. |
| storage bin drain | |
|
| opening is free from | |
|
| obstruction and debris. | |
|
|
|
IF SERVICE IS REQUIRED
If the need for service arises, contact the dealer from whom the unit was purchased. State the Model Number and Serial Number and explain the problem. The Model and Serial Number plate is located inside unit at upper right hand corner.
If you do not know the name of the selling dealer or local service company, you can check online at
42