User’s Manual

ADJUSTING ICE CUBE SIZE

On models equipped with an ice maker, the cube size may be adjusted by changing the amount of water injected into the ice maker assembly.

1.Remove the ice maker assembly cover (Figure 39).

2.Locate the adjusting screw on the ice maker assembly control box. The adjusting screw is just below the minus (–) and plus (+) signs on the control box (see Figure 40).

– +

automatic ICE MAKER

UL133

UL122

Figure 39

Figure 40

3.Turn the adjusting screw toward the minus (–) sign (clockwise) for smaller cubes or toward the plus (+) sign (counterclockwise) for larger cubes.

4.Install the ice maker assembly cover.

Some units are not frost free and must be defrosted periodically. Refer to CLEANING AND MAINTENANCE.

NOTE

Be sure to make water and temperature adjustments in small increments. Too big of an adjustment could cause the unit to malfunction.

40