TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
If the unit appears to be malfunctioning, read through NORMAL OPERATION first. If the problem persists, check the TROUBLESHOOTING GUIDE. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem could be something very simple which can be solved without a service call.
TROUBLESHOOTING GUIDE
! DANGER !
ELECTROCUTION HAZARD
NEVER attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected.
Troubleshooting — What to check when problems occur
Problem | Possible Cause | Remedy |
No interior light | Loose or burned out | Tighten or replace bulb. |
| bulb | See LIGHT BULB |
|
| REPLACEMENT. |
Light won’t go out | Light on/off switch is | Turn switch to OFF. |
when door is | turned to ON. | See LIGHT SWITCH AND |
closed. |
| BULB. |
The unit is not | Light staying on | Adjust door so light switch |
cold enough |
| bracket contacts switch |
|
| plunger. See ALIGNING |
|
| THE DOOR. |
|
| 75 BEV - Make sure the |
|
| light switch is in the “OFF” |
|
| position. |
| Door gasket not | Adjust door. See |
| sealing properly | ALIGNING THE DOOR. |
| Item(s) interfering with | Reposition or remove |
| door. | item(s). |
| Dirty condenser coils | Clean condenser. See |
|
| CLEANING AND |
|
| MAINTENANCE. |
|
|
|
49