8.Allow at least 1-1/2 inches clearance behind the unit for electri- cal and water supply connections.

LEVELING THE UNIT

It is important that the unit, primarily the ice maker assembly, is level. All 75 and 15 Series units are equipped with adjustable feet for leveling and height adjustment (see Figure 9). All other units have rubber feet.

TURN FOOT TO ADJUST

UL105

Figure 9

 

GRILLE INSTALLATION

NOTE

Model SP18 Icemakers come with the grille already installed.

29 AND 75 MODELS

1.With a standard blade screwdriver (or 1/4” nutdriver), remove the screw needed to attach the grille (see Figure 10).

2.Remove the control knob by pulling it toward you.

3.Carefully remove the grille from inside the unit. A small screw hole is located toward the top of the middle recessed section of the grille.

9