CONNECTING THE WATER SUPPLY

1.Install the 1/4 inch copper water line from the main water source. On ice maker models BI-95 and BI-98, the water line is inserted through the hole in the rear of the unit to connect to the solenoid valve in the front (see Figure 3).

POWER

CORD

3.Carefully bend the water sup- ply line into position and con- nect the line to the solenoid valve (see Figures 5 and 6). Avoid kinking the water sup- ply line.

WATER

CONNECTION

WATER LINE

UL101

 

Figure 3

2.Locate the compression fit-

ting and ferrule packed in the

UL103

unit. Slide the

compression

Figure 5

fitting and ferrule over the

 

1/4 inch water supply line.

 

Do not use thread sealing

 

compound or

tape. Using

 

two wrenches,

tighten

the

 

compression fitting on

the

 

supply line (see Figure 4).

 

 

WATER LINE

 

UL104

 

UL134

Figure 4

Figure 6

7