1

LOCKING

KNOB

Set-up

2

3

LOCKING

KNOB

STEP 1

Turn stand upside-down and locate the RED Locking Knob. Turn the Locking Knob ¼ turn counterclockwise to the open position shown above.

STEP 2

Turn the stand back to the upright position and fold all three legs down until they stop in the open position. (The legs should move freely to the open position, if they do not, make sure the Locking Knob is in the open position.)

STEP 3

After all three legs are in the open position turn the RED Locking Knob

¼turn clockwise to the closed position shown above.

4

5

OPEN

CRADLE

CLOSED

CRADLE

6

OPENCLOSED

7

STEP 4

Unfold the cradle pad arms to the open/horizontal position for supporting the body of the guitar.

2

STEP 5

Rotate the Neck Yoke to the open position shown above. The yoke should firmly snap into position.

STEP 6

Unhook the Retention Strap from the open position and pull strap around to the front of the yoke. Stretch the strap over the other end of the yoke to secure guitar.

STEP 7

OPTIONAL: Convenient guitar pick storage slots are located along the top of the yoke.

3

Page 2
Image 2
Ultimate Support Systems GS-200 warranty Set-up, Step