Ultimate Support Systems TS-70B Speaker Stand Mounting Bracket, Zippered Tote Bags, Set-Up, Ge T

GE T

LASTING VALUE!

Safe & Secure

Supports more weight than other lightweight stands; locking pin for absolute speaker security.

Truly PortableQuickly folds into an ultra-slim, lightweight unit.Versatile & Reliable

Includes integrated socket adapter and foot caps that won’t fall off.

Limited Lifetime Warranty Constructed of the finest materials and backed by our award-winning customer support (see Warranty Information on pg. 4 for details).

2

SET-UP

	STEP 1
1	Loosen leg fitting hand knob.
	STEP 2
2	Slide leg fitting down to maximum
	diameter of leg spread (leg braces
	should be parallel to the floor. Tighten
	hand knob.
	CAUTION: Do not over tighten
	hand knob; usually two turns
	is enough. Also, do not store
	in tightly locked position.
	STEP 3
3	Remove safety pin from slot on upper
	telescoping tube. Loosen hand knob

on telescoping collar and raise center tube 6-10”. Retighten hand knob.

STEP 4

4Select the correct size socket adapter. Put speaker cabinet on top. Slowly loosen the hand knob and raise the cabinet to desired height. Tighten hand knob. Insert safety pin into slot on the telescoping tube.

STEP 5

5To lower speaker, remove the safety pin from the slot. Slowly loosen the hand knob. Use caution and slowly lower the upper telescoping tube. Tighten hand knob and remove speaker cabinet.

SPECIAL INSTRUCTIONS

1.Occasionally clean the stand with a damp cloth or non-abrasive cleaner. Do not lubricate or use silicone spray on the center tube.

2.When loading the tripod, ONLY add the speaker when the tripod is in a fully upright position (all legs on the floor).

3.Do not drag the Tripod Speaker Stand while it is loaded; this could cause breakage of the fittings and result in damage to the stand.

4.When supporting equipment, check that the telescoping collar is securely tightened and the safety pin is inserted into slot on upper telescoping tube.

5.Always release the collar with caution and stand clear of load.

ACCESSORIES

Speaker Stand Mounting Bracket

BMB-200K (#10766)

External bracket securely mounts any speaker cabinet with a flat bottom on an Ultimate Support speaker stand.

Speaker Stand Socket

Mounting Bracket

TSM-150MK (#13421)

TSM-138MK (#13425)

Internal metal bracket securely mounts any speaker cabinet with a flat bottom on an Ultimate Support speaker stand.

Zippered Tote Bags

Heavy-duty, padded, zippered Tote Bags

BAG-90 (#15691)

Holds one TS-70B Speaker Stand 10.5” x 49.5” (267 mm x 1257 mm)

BAG-90D (#15693)

Holds two TS-70B Speaker Stands 14.5” x 49.5” (368 mm x 1257 mm)

3