SET-UP
STEP 1
1 | Open leg fitting lock lever. |
2 | STEP 2 |
Turn stand upside down and pivot legs so Ultimate Support label |
faces you.
STEP 3
3 | Turn stand upright and slide leg fitting to adjust diameter of leg |
| |
| spread. Leg braces should be parallel to floor for maximum stability. |
| Close lock lever. |
4 | STEP 4 |
The | |
| sockets. Use the lower position for |
| push buttons and raise adapter until it locks in raised position. |
5 | STEP 5 |
Line up arrow TeleLock® collar with “RAISE”. Then raise center tube | |
| |
| to desired height. Set to “LOCK” position. |
6 | STEP 6 |
To lower speakers, SLOWLY rotate arrow on TeleLock collar to |
“LOWER” position until speaker starts to lower. To slow descent, turn collar toward the “RAISE” position. When ready to remove the speaker, rotate collar to “LOCKED” position.
On
SPECIAL INSTRUCTIONS
1.Occasionally clean the stand with a damp cloth or
2.When loading the stand, ONLY add the speaker when the stand is in a fully upright position (all legs on the floor).
3.Do not drag the stand while it is loaded; this could break the fittings and result in damage to the stand which will not be covered under warranty.
4.Check that the leg collar is securely locked when supporting equipment.
5.Always release the TeleLock collar with caution and stand clear of the load.
6.The stand is equipped with a tube lock which prevents accidentally pulling out the center tube.
LIGHTING TREE
Turn a Tall
For a
For a
ACCESSORIES
Speaker Stand
Mounting Bracket
External bracket securely mounts any speaker cabinet with a flat bottom on an Ultimate Support speaker stand.
Speaker Stand Socket
Mounting Bracket
Internal metal bracket securely mounts any speaker cabinet with a flat bottom on an Ultimate Support speaker stand.
Zippered Tote Bags
Tote Bags
Holds one
Holds two
Holds one
Holds two
2 | 3 |