EARTH
IN MY ROOMTM
Light-up Earthscape
Battery Installation
Tool required - Small Phillips head screwdriver
Requires 4 “AA” alkaline batteries (not included).
Wall Mount
1. Using a Phillips head screwdriver, remove the battery cover as shown.
2.Insert 4 "AA" batteries as indicated in the battery compartment and replace cover.
3. IMPORTANT! Switch Earth in My Room to the
ON position before handing on the wall. |
|
| |
PLEASE NOTE: The unit will not activate | On/Off |
without the remote control. | switch |
6+
2160
Battery cover
Remote Control
1.Using a Phillips head screwdriver, remove the battery cover as shown.
2.Insert 2 "AAA" batteries as indicated in the battery
compartment and replace cover.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD
Questions? Visit unclemilton.com
