UNICOM Electric FEP-32024T specifications Diagnosing LED Indicators, Cabling

Diagnosing LED Indicators

The Switch can be easily monitored through panel indicators to assist in identifying common problems you may encounter and where you can find possible solutions.

If the power indicator does not turn on when the power cord is plugged in, you may have a problem with power cord. Than check for loose power connections, power losses, or surges at power outlet. If you still cannot resolve the problem, contact your local dealer for assistance.

￿Cabling

RJ-45 ports: Use unshielded twisted-pair (UTP) or shielded twisted-

pair ( STP ) cable for RJ-45 connections: 100m. Category 3, 4, or 5 cable for 10Mbps connections or 100m. Category 5/5e cable for 100Mbps connections. Also be sure that the length of any twisted-pair connection does not exceed 100 meters ( 328 feet ).

10