Setting Up Your Headset, Charge the Battery | Uniden BT230 instruction

	Press it to	Press & hold it for
	Press it to	2 seconds to	4 seconds to
		2 seconds to	4 seconds to
	Volume Up

During a call: Increase the call volume.

NA

During a call-waiting call: Put the active call on hold and switch to the waiting call.

Volume Down

During a call: Decrease the call volume.

NA

NA

Setting Up Your Headset

Charge the Battery

►Before using your headset, charge the battery until the red LED turns off (about 2 hours). Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery.

►Connect the adapter to the power connector on the side of the headset, then plug it into any standard 120 V AC (regular indoor) power outlet.

Image 6

Uniden BT230 manual Setting Up Your Headset, Charge the Battery, Press it to, Seconds to Volume Up, Volume Down

Contents

BT230 Bluetooth Headset User’s Guide Contents What the LED Colors Mean Color State Meaning What the Tones Mean State MeaningTone Meaning What the Buttons Do Press it to Press & hold it for Seconds toMultifunction button MFB Seconds to Volume Up Setting Up Your HeadsetCharge the Battery Volume Down Pair the Headset to Your Bluetooth Phone Connect to Your Phone Once the Headset is Paired Using Your Headset TurningHeadset on Features Basic Call Waiting Voice-Activated Dialing Using the Multipoint Function Pairing to More than One PhoneUsing Both Phones Troubleshooting and Maintenance Try Reset the Headset Making sure the call connected and is still active Battery life Noise or Static on the Headset Cleaning the headset Important Safety InstructionsAvoiding hearing damage FCC Notice Industry Canada statement Important Note Radiation Exposure StatementPage Uniden America Corp. Ft. Worth, Texas