18

Installing a Line Filter or DSL

Filter

A telephone line lter or DSL lter
prevents services that use t he phone
line from causing interferenc e on your
phone. To get a line lter, contact your
service provider or look in an el ectron-
ics store.
Plug the lter into the telephone wal l
jack and plug the base into the lt er.
Make a test call to make su re the noise
is gone.

Liquid Damage

CAUTION: If the base is covered in

liquid, disconnect the adapte r &

phone cord from the wall before

touching it.

If the liquid is only on the exte rior
housing of the base or handset, w ipe it
o and use as normal. If you can he ar
liquid inside the housing:
Remove all compartment covers,
and disconnect all cab les and cords.
If liquid is leaking from a ny vent
or hole, turn the phone so that vent
faces down. If not, place the la rgest
vent face down.
Let dry for at least 3 days. Check
for liquid inside the phone before
replacing compartment covers &
reconnecting cords.
Resetting Handsets
If you have trouble with a handset or
if you want to replace one, clear the
registration informati on from the base
and the handset:
Press & hold
End
and
#
at the same
time until you see the
System Reset
menu.
If you still have the base the ha ndset
is registered to, select
Deregister HS
,
then select the handset you wa nt
to reset. If you don’t have that base
anymore, select
Base Unavailabl e
.
1.
2.
3.
1.
2.
To conrm, select
Yes
. e handset
displays
Handset not regi stered
.
Registering Handsets
If you see a “not registered” messa ge on
a handset, you must register it to a ba se
before using it.
Place the handset in the bas e;
the display should say
Handset
Registering
.
Wait until the display says
Registration C omplete
(about 30
seconds), then pick up the handset
and press
Talk/flash
.
If you don’t hear a dial tone or the
display says
Registration Fa iled
,
charge the battery completel y, then
try again.
Adapter and Battery Information

AC adapter

Part number PS-0035
Input voltage 120V AC, 60 Hz
Output voltage 8V AC @ 300mA
Use only the supplied AC adapters.
Use the proper adapter for the base &
any chargers.
Do not place the unit in direct s unlight
or subject it to high temperatures .

Battery pack (with normal use)

Part number BT-1021
Capacity 300mAh, 2.4V DC
Talk time about 7 hours
Standby time about 7 days
Battery life about 1 year
Replace the battery when the t alk or
standby time becomes noticea bly re-
duced. For replacements, cal l the Parts
Department (see the front cover).
When the battery gets low, the hand set
beeps and shows a low battery aler t; put
the handset in the cradl e for recharg-
ing.
3.
1.
2.
3.