Handset registration
To select a | If your handset is registered to more than one |
base unit | base unit, it will automatically select the one |
| with which it can best set up a radio link |
| (usually the nearest one). Or you can select a |
| base unit manually. |
| You don’t need this function if you have |
| only one base unit. |
1 | Press the right Soft button [Menu], then |
| press the or button to scroll to |
| Handset |
2
3
4
!
Press the right Soft button [OK]
Press the or button to scroll to Select Base, then press the right Soft button [OK]
uThe display shows a list of base units. The currently selected base unit (or Best Base for automatic selection), has a tick next to it.
Move the highlight to the base unit number you want, or to Best Base, then press the right Soft button [OK]
uThe display may show No base found for a few moments, then it should return to standby mode. If it continues to show No base found, you’ll need to select a different base unit, or Best Base for automatic selection.
We recommend that you leave this setting at Best Base (the default) if you want your handset to work with more than one base unit.
9
