Uniden DECT2085-4WX manual Resetting the Handset, Troubleshooting

Troubleshooting

When you have this	Try...
problem...
The answering system does	• The memory may be full. Delete some or all of the saved messages (see page
not record any messages.	47).
The answering system
doesn’t say what time	• Checking to see if you have set the time (see page 44).
messages were recorded.
Messages are incomplete.	• The incoming messages may be too long. Ask callers to leave a brief message.
	• The memory may be full. Delete some or all of the saved messages (see page 47).
I can’t hear base or handset	• Adjusting the speaker volume on the base or handset (see page 35).
speaker during call screening
	• Checking to see if the call screen feature is set to on (see page 45).
or message playback.
I can’t access answering	• Checking to see if you are using the correct PIN number (see page 48).
system from a remote	• Checking to see if the touch-tone phone you’re using can transmit the tone for at
phone.	least two seconds. If it cannot, try using a different touch-tone phone.

Resetting the Handset

You may need to reset your handset in the following instances:

•You get the message Registration Failed when you try to register the handset.

•You are unable to register any handsets to the base.

•When you are instructed to by one of Uniden’s call center representatives.

1)Press and hold [] and [#] for more than five seconds. Select DEREGISTER HS.

) Select the handset which you are operating, and then press [Menu/Select].

55