Register the Handset
You need to register the DSS5805 before use.
To register the additional handset, place the DSS5805 handset on the original unit’s base (DSS5855) for at least 5 seconds. The status LED on the original base will flash indicating that registration is occurring. After 5 seconds, the DSS5805 handset will be registered.
•In some cases you may need to attempt registration
a few times.
•You cannot register the handset when the original phone is in use.
Call Transfer Feature
You can transfer an outside call to the original unit. For more instructions, see the owner’s manual supplied with the original unit.
To transfer a call to the | Press xfer/del during a call. |
original unit | When the original unit receives the |
| transferred call, the DSS5805 handset |
| returns to the standby mode. |
To receive a transferred call | Press talk/flash or spkr to answer |
from the original unit | the transferred call. |
To cancel the transfer | Press talk/flash or spkr. |
•If you transfer a call and it is not picked up after 5 minutes,
you hear a beep, and the call will be disconnected.
•Only one handset at a time can talk with an outside caller.
The earcap of this telephone may attract and retain small metallic objects.
– 4 –
