[ 16 ]
DirectLink Mode

Entering the Two Way Communication between the Handsets

Anywhere without the Base

1) Enter the “DirectLink Mode” menu (see “Entering the Menu” on page 15).
2) Press the ENTER soft key to enter the DirectLink
mode. You will hear a confirmation tone, and
“DirectLink Mode Complete” appears.
3) To return back to the normal mode, exit the DirectLink
mode. To exit the DirectLink mode, press the CANCEL
soft key, then the OKsoft key, or return the handset to the cradle.
Handset Setup

Setting a Ringer Volume

1) Enter the “Handset Setup” menu, then the “Ringer Volume” submenu
(see “Entering the Menu” on page 15).
2) Press /▲or ▼to adjust the ringer settings
(Ringer Volume Off, Ringer Volume Low, or
Ringer Volume High). You will hear a ringer or
melody at the Selected volume (if you select “Ringer
Volume Off”, no ringer or melody will sound).
3) Press the OK soft key. You will hear a confirmation tone.

To enter

DirectLink mode

press [ENTER]

BACK BACK ENTER

Ringer Volume

High

BACK OK
•If you select “Ringer
Volume Off”,
icon appears in
the display.
UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM Page 16