[ 19 ]
Answering System Setup

Setting a PIN Code

1) Enter the “Answ. Setup” menu, then the “Security
Code” submenu (see “Entering the Menu” on page 15).
2) Enter a two-digit PIN code (01-99) using the number
keypad ( - ).
3) Press the OK soft key. You will hear a confirmation tone.

Setting the Ring Time

1) Enter the “Answ. Setup” menu, then the “Ring
Time” submenu (see “Entering the Menu” on page 15).
2) Press /or to select a Ring Time (Toll
Saver,4 Times,6 Times, or 9 Times).
3) Press the OK soft key. You will hear a confirmation tone.

Setting the Record Time

1) Enter the “Answ. Setup” menu, then the “Record
Time” submenu (see “Entering the Menu” on page 15).
2) Press /or to select Record Time
(1 Minute,4 Minutes, or Announce Only).
3) Press the OK soft key. You will hear a confirmation tone.
For Answering Setup
menu, you can also
set them from the
base (see page 44).
Security Code
80
BACK OK
Ring Time
Toll Saver
4 Times
OKBACK
Record Time
1 Minute
4 Minutes
OKBACK
UP308BH (DSS2465) ENG OM 12/28/04 8:23 AM Page 19