When to Re-register Handsets

In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow registration steps outlined on page 13.

Re-registration is required in the following scenarios:

1)You’ll need to re-register both handsets (follow steps on page 13) each time the digital security code is changed. (Refer to page 32 for details regarding the Digital Security Code.)

2)When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same registration process on page 13.

3)If any handset’s battery becomes very low, the handset must be recharged for 15 - 20 hours and re-registered to the main base unit.

4)In any circumstance in which you experience difficulty connecting to the main base to place or receive calls, the handset should be re-registered.

Note: Make sure to return the handsets to the cradles after each phone call.

14

Page 15
Image 15
Uniden DXI4560 Series, DXI4561 Series, DXI4561 Series, DXI4560 Series manual When to Re-register Handsets