C. Connect the Base Unit and Charge the Handset
1) | Connect the AC adapter to the DC IN 9V jack and to |
|
| a standard 120V AC wall outlet. | Route the cord. |
2) | Place the handset in the base unit with the keypad |
|
| facing forward. |
|
3) | Make sure the charge/in use LED illuminates. |
|
| If the LED does not illuminate, check to see that the AC |
|
| adapter is plugged in and the handset makes good |
|
| contact with the base charging contacts. |
|
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
4)Charge your handset at least
5) Once the handset battery pack is fully charged, |
|
connect the telephone line cord to the TEL |
|
LINE jack and a telephone outlet. |
|
If your telephone outlet isn't modular, contact | Modular |
your telephone company for assistance. |
w w w . u n i d e n . c o m
! 
•Use only the supplied
AD-0001 AC adapter. Do not use any other AC adapter.
•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
G E T T I N G S T A R T E D [ 9 ]
G E T T I N G S T A R T E D
