Uniden EXP-2900 manual Storing a Phone Number in Memory

Storing a Phone Number in Memory

Your EXP2900 Series phone has 10 memory locations for storing important telephone numbers.

1) Remove the handset from the base.

2) Press m. The talk/batt LED flashes.

3) Enter the phone number, up to 16 digits. If a pause is needed during the dialing sequence, press pause to insert a pause. Each pause counts as a digit and represents a two second delay in time between digits as they are sent.

4) Press m again.

5) Enter the memory location (0-9) on the keypad. A tone indicates that the number is stored. If you enter a number in a location that has a previously stored number it will overwrite the existing number without warning.

•The pause button counts as one digit. Pressing pause more than once increases the length of pause between numbers.

•You have 20 seconds after pressing m to enter the number you wish to store. Otherwise, an error tone will sound.

•You cannot store numbers in m1, m2, or m3. (See "One- touch priority dialing", on page 16.)

MEMORY DIALING

M E M O RY D I A L I N G [ 15 ]